Coltri ICON 100 SH High-Pressure Compressor (SC100100/R/N), 100 L/min, 330 Bar
The Coltri ICON 100 SH is a portable high-pressure compressor designed for the independent filling of compressed-air cylinders. It is equipped with a Honda GP200 petrol engine and a four-stage MCH 6 compressor block. Since it does not require an electrical connection, it is suitable for mobile operations, boats and locations without access to a fixed power supply.
Portable high-pressure compressor with Honda petrol engine
The compressor delivers 100 L/min and has a maximum working pressure of 330 bar. Its compact design and 37 kg net weight make transportation and positioning easier.
Key advantages
- Independent operation: the Honda GP200 petrol engine allows the compressor to operate without connection to the electrical grid.
- High pressure: maximum working pressure of up to 330 bar.
- Four-stage compression: Coltri MCH 6 compressor block.
- 100 L/min air delivery: suitable for applications requiring high-pressure cylinder filling.
- Compact design: net weight of 37 kg.
- Eco-filter system: designed for compressed-air treatment. Breathing-air quality must be verified through appropriate testing and documentation for the filtration system.
Technical specifications
| Parameter | Value |
|---|---|
| Manufacturer | Coltri |
| Model | ICON 100 SH |
| Part number | SC100100/R/N |
| Type | Portable high-pressure compressor |
| Drive | Petrol engine |
| Engine | Honda GP200 |
| Engine power | 3.6 kW (4.8 hp) |
| Air delivery | 100 L/min (6.0 m³/h) |
| Maximum working pressure | 330 bar |
| Number of compression stages | 4 |
| Compressor block | MCH 6 |
| Filtration system | Eco-filter |
| Filling time for a 10 L cylinder, from 0 to 200 bar | Approximately 20 minutes |
| Filling hose length | 1.2 m |
| Connection type | DIN 232 / DIN 300 / INT/YOKE, depending on configuration |
| Frame | Steel, black RAL 9005 |
| Dimensions (W × D × H) | 79 × 35 × 40 cm |
| Net weight | 37 kg |
| Compressor-block oil | Coltri Oil ST 755, synthetic |
| Engine oil | 10W-30, according to Honda requirements |
| Cooling | Air cooling |
| Cooling airflow | 990 m³/h |
| Breathing-air standard stated on the page | EN 12021 |
Applications
The Coltri ICON 100 SH is designed for mobile applications where a high-pressure compressed-air source is required:
- filling scuba diving cylinders;
- mobile diving centres and small boats;
- field operations and expeditions;
- mobile filling points for breathing-apparatus cylinders;
- other applications for which the manufacturer specifies the use of a high-pressure compressor.
When used for breathing-air applications, the applicable breathing-air quality requirements must be observed, filter elements must be monitored and the necessary tests must be performed. The presence of an Eco-filter does not replace air-quality testing or confirmation of compliance.
Honda GP200 engine and independent operation
The compressor is powered by a Honda GP200 petrol engine rated at 3.6 kW. This configuration makes it possible to operate the equipment in locations without access to an electrical supply.
During operation, the petrol engine must be positioned outdoors or in a specially designed area with safe exhaust-gas discharge. The air intake must be located away from engine exhaust and other potential sources of contamination.
Coltri MCH 6 compressor block
The ICON 100 SH uses the four-stage MCH 6 compressor block. It is designed to compress air to high pressure and provides the stated air delivery of 100 L/min.
To maintain operating performance, follow the manufacturer’s maintenance schedule, use the recommended Coltri Oil ST 755 and install original consumables.
Eco-filter filtration system
The compressor is equipped with the Eco-filter filtration system. The condition of the filter cartridge and timely replacement are particularly important when preparing air for breathing cylinders.
The maintenance interval depends on operating conditions, temperature, humidity and actual running hours. The indicative 15–20-hour interval stated on the original page should be checked against the current manufacturer’s instructions. If an unusual odour is detected, stop using the compressor to fill breathing cylinders until the air quality and filtration system have been checked.
Optional Autostop system
The Autostop automatic shutdown system, part number SC000521, is available as an option for the ICON 100 SH.
This option automatically stops the compressor when the preset pressure is reached. The original product page lists settings of 232 or 300 bar. Confirm Autostop availability when ordering; it should not be assumed to be included as standard.
Operating recommendations
- Use only oils recommended by the manufacturer for the compressor block and engine.
- Follow the Coltri and Honda maintenance schedules.
- Check the condition of the filter cartridge and consumables.
- Position the petrol engine safely and prevent exhaust gases from entering the intake-air stream.
- Do not exceed the maximum working pressure of the equipment or the cylinders being filled.
- Before filling, make sure the filling connection matches the cylinder valve type.
- For breathing-air applications, carry out air-quality checks in accordance with the applicable requirements.
Frequently asked questions
What is the air delivery of the Coltri ICON 100 SH?
The stated air delivery is 100 L/min, or 6 m³/h.
What is the maximum working pressure?
The maximum working pressure is 330 bar.
Which engine is fitted?
A Honda GP200 petrol engine rated at 3.6 kW (4.8 hp).
How long does it take to fill a 10-litre cylinder?
The original specifications state approximately 20 minutes to fill a 10-litre cylinder from 0 to 200 bar. Actual filling time depends on operating conditions and cylinder parameters.
Which oil is required for the compressor block?
Synthetic Coltri Oil ST 755 is specified.
Which oil is used in the engine?
The product page specifies 10W-30. Before changing the oil, check the approval and recommendations in the Honda manual for the specific engine.
Can automatic shutdown be installed?
Yes. The Autostop SC000521 system is available as an optional extra. The original page lists settings of 232 and 300 bar.
Can the compressor operate without electricity?
Yes. The petrol engine allows independent operation without connection to the electrical grid. Safety requirements for internal combustion engines must still be followed.

