Air Filter TGA6054 (Italy) — Analog of C 630 MANN-FILTER

1. Purpose and Operating Principle

The filter performs three main tasks in the system:

• Fine air filtration at the compressor or engine intake.

• Protection of the airend and precision components against premature wear and abrasive damage.

• Maintaining a stable airflow without creating excessive suction resistance.

A high-quality filter element ensures equipment service life. Using an exact C 630 analog guarantees that factory filtration efficiency is maintained.

2. Technical Specifications

Filter element parameters according to the MANN-FILTER C 630 specification:

• Model / Analog P/N: TGA6054

• MANN-FILTER Cross-Reference: C 630 (Picolino)

• Outer Diameter (A): 60 mm

• Inner Diameter (B): 35 mm

• Inner Diameter 1 (C): 35 mm

• Height (H): 69 mm

• Country of Origin: Italy

• Warranty Period: 14 days

• Availability: In stock (according to supplier data)

⚠️ Data not available in technical documentation and cannot be confirmed. Exact filter media surface area, nominal flow capacity in m³/h, paper impregnation composition, and maximum pressure drop. Before installation, make sure the geometric dimensions (60×35×69 mm) match your housing mounting seat. Clarify details with an Acvatron SRL manager.

3. Design Features

Decodification and execution features:

• Italian production — compliance with strict European air filtration standards.

• Identical to original C 630 — complete geometric and mounting compatibility with original housings.

• Dense pleating of filter media — provides high dirt-holding capacity with compact dimensions (height 69 mm, outer diameter 60 mm).

Scope of supply. Supplied as a single TGA6054 replacement filter element. The presence of seals or additional components must be verified upon ordering ⚠️.

4. Installation Recommendations

• Power lockout. Turn off the compressor unit and completely depressurize the system (LOTO).

• Dismantling. Open the air filter housing, remove the old dirty element. Thoroughly clean the inner cavity of the housing from dust and oil deposits.

• Size verification. Compare the dimensions of the new TGA6054 filter with the removed item (outer diameter 60 mm, inner 35 mm, height 69 mm).

• Installation. Carefully place the new cartridge onto its seat, ensuring a tight fit of the seals without misalignments. Do not use sealants or Teflon tape.

• Closing the housing. Secure the housing cover, preventing any gaps that could allow unfiltered air bypass.

• Airflow test. Perform a test run and ensure there are no abnormal noises or vacuum leaks.

⚠️ Replace the filter element regularly according to the compressor maintenance schedule (typically every 2000–3000 operating hours or upon performance drop).

5. Analogs and Comparison

Main cross-reference and direct replacement:

• TGA6054 (this product): Italian analog, full dimensions 60×35×69 mm.

• MANN-FILTER C 630 (original): base reference P/N (GTIN: 4011558175405), dimensions 60 × 35 × 69 mm.

• Equipment applicability: Boge compressors (C, K, Top Air SC series), special machinery, and engines compatible with Picolino series filters.

The main advantage of the TGA6054 analog is European manufacturing quality while maintaining the exact dimensions of the original C 630.

6. Common Errors

1. Installing a filter with incorrect inner or outer diameters. Leads to unfiltered air bypassing the filter element.

2. Mounting into a dirty housing. Allows accumulated dust directly into the intake valve.

3. Ignoring the replacement interval. Heavy clogging of the cartridge causes a pressure drop and compressor overload.

4. Mechanical damage to the pleats during careless installation into a tight housing.

7. Application Area

• Screw compressors (specifically Boge C and K series requiring C 630 type filters).

• Industrial and mobile plants utilizing Picolino-sized filter elements.

• Intake systems for internal combustion engines and special machinery.

• Technical maintenance and repair of pneumatic systems in Moldova (Chisinau and regions).

8. Expert Opinion

„The air filter is the first line of defense for the airend. Using a quality TGA6054 analog, which fully matches the MANN-FILTER C 630 geometry (60x35x69 mm), reliably protects the compressor from abrasive wear without paying extra for brand packaging. The most important thing is timely replacement.”

Vitali Boluchevski, Lead Engineer, Acvatron SRL, 18 years of experience

9. FAQ

1. What are the exact dimensions of the TGA6054 filter? The outer diameter is 60 mm, inner diameter is 35 mm, and height is 69 mm (fully corresponds to MANN-FILTER C 630).

2. Is TGA6054 an exact analog of C 630? Yes, the filter is made in Italy and completely replaces the original MANN-FILTER C 630 element.

3. Which equipment does this filter fit? The filter is used in screw compressors (such as Boge C and K series), as well as a range of industrial engines and machinery.

4. How often should the air filter be replaced? Replacement is carried out according to the compressor station routine, on average every 2000–3000 operating hours or when signs of clogging appear.